How to pair your PS4 controller wirelessly
[Updated: 8/28/2016] We all know the drill. You’ve just run out and spent $65 for that new and oh-so-cool camo DUALSHOCK 4 controller for your PS4. Well, now you’ve got to go through that hassle of pairing it with your console. But, why can’t I pair it wirelessly? You can. Let’s explore.
The Sony recommended procedure of pairing your new controller to your PS4 is by plugging it into the console with the Sony USB cable and powering the PS4 with the power button. While that’s all well and good (or at least so Sony thinks), it’s a complete and utter hassle… especially when you have other controllers already working. If this is your only DS4 controller (i.e., your other one is broken or lost), your only choice is to pair it with a cable… so you better go find that cable.
However, if you have more than one working controller, you can skip this hassle and go to …
… wait for it …
PS4 DUALSHOCK 4 controllers are bluetooth devices and like all bluetooth devices you can pair them wirelessly. Of course, you can’t pair the device if it is the only device (see above), but if you happen to have other working devices to control your PS4 (like another controller or a media remote), you’re good to go to with wireless pairing.
Before you start this process, go to the PS4’s Settings => Devices => Bluetooth Devices area and leave it on this screen. On this screen you’ll see all your paired devices and this is also where all new unpaired devices will appear. Unpaired devices will have no grey or green dot next to them.
How to begin? Press and hold the PS button and the sharing button simultaneously. The sharing button is the small black oval button to the upper left of the touch pad labeled creatively enough SHARE. Press and hold the PS and sharing buttons until the lightbar begins to strobe quickly (approximately 3-5 seconds). While it’s quickly double strobing, it’s in the pairing state like any other bluetooth device. If the strobe is a slow on and off, then the controller is trying to connect to your PS4 or PC. This isn’t what you want. If it’s slow strobing, then you’ll need to wait until it stops to try again. Pressing the PS button before the share button could lead you into slow strobing. So, I would suggest pressing and holding the share button slightly before you press and hold the PS button to avoid triggering the slow strobe.
Once it’s double strobing, look at your screen under Bluetooth Devices and look for the DUALSHOCK 4 that has no dot (probably at the bottom of the PS4 screen). Using a working controller or remote, select the new controller and complete the pairing on the next screen.
If you don’t see your DUALSHOCK 4 device in the list, check to make sure the device is still in pairing mode. If not, put it in pairing mode. If it’s still in pairing mode, back out of that screen and then go back into it. This will force a search refresh for new devices. Hopefully it will appear now. If not, move closer to the PS4 with the new controller. If this all fails, use the USB pairing method above… again, time to go dig out that cable.
Once paired, you can now use the controller normally.
Don’t have access to your PS4?
I’ve had a number of comments on this article regarding corruption or rebuilding of a PS4 after a new hard drive insertion. Before you lose access to your PS4 entirely either because you failed to power off the unit properly, because the hard drive failed or because you replaced the hard drive, you should make sure you have some alternative form of PS4 XMB menu control. You have to remember to set this up while you still have a working PS4. You won’t be able to easily do some of these steps after you lose access and cannot find or do not have a proper microUSB pairing cable.
Note, if you are replacing the PS4’s hard drive, setting anything up in advance probably won’t work as the new hard drive will need to be reinstalled with a new operating system. So, any settings will be lost on hard drive replacement… skip down to Wired Controller below or be prepared with a PS4 compatible micro USB cable.
Many flat screens today support control of the PS4 through the HDMI cable using your TV’s remote. This is called HDMI-CEC or simply CEC. You must enable this on your TV and on the PS4 both. To enable this on your PS4, go to Settings=>General=>HDMI link and check this box. Now, go to your TV and enable CEC / HDMI Link to control the connected PS4 with your TV’s remote. Not all TV manufacturers call it CEC, some call it something with the word ‘Link’ in the name, but the protocol is standard. Once enabled, reboot your PS4 and then turn your TV off and then on.
Note, the TV’s remote does not have a PS button. Therefore, there is no way to get into the menu using CEC alone with a generic TV remote. If you have a Sony branded TV, it might work. But, non-Sony branded TVs do not seem to get into the PS4’s XMB with any button press.
CEC control has changed since the latest PS4 system update. When you have CEC enabled, the remote is now considered a controller. Once you flip over to the PS4’s HDMI port on your TV, the PS4 should turn on. Once booted up, the remote control should present as a controller (see screenshot to the right). The screen should show your login ID. Press your ENTER or OK key on the remote to enter into the XMB menu. Apparently, Sony realized this intrinsic problem with CEC and updated the PS4 to now allow the remote control to be recognized as an XMB controller on the bootup screen. What this all means is that you can now fully control your PS4 with your TV’s remote control without needing a DS4 controller at all. With CEC, you can now pair your controller using your TV’s remote through settings. Though, I wouldn’t recommend trying to play games using your TV’s controller.
If the PS4’s screen does not show the login ID panel and simply has the words “Press the PS button to use the controller” in the middle of the screen, the PS4 has not recognized a controller. This can be for several reasons. If you powered the PS4 on before flipping to it via HDMI, the PS4 doesn’t see the TV as the controller. The device that powers the PS4 on is the device presented on the boot up screen. When you use a DS4 to power it on, the DS4 will show as the controller on the boot screen. When you use the the TV to switch to and power on the PS4, the TV’s controller becomes the default on this screen. If you can’t get the TV’s controller to show up at all, then you will need to skip down to the next section for pairing with a USB cable.
As mentioned above, you will need to set CEC up on your TV and the PS4 in advance to use this feature. If you have no functional gamepad controllers, your TV doesn’t support CEC or you haven’t set CEC up in advance, skip to USB pairing.
MicroUSB pairing cable
If you’re looking for something right away, you can stop by a store (or order online) and purchase a microUSB pairing cable. Sony offers an official cable that costs around $10. You can get a cable from the following places:
If you’ve completely lost control to your PS4 through your Dual Shock 4 and you don’t have any other way to activate a PS button and you can’t seem to get your DS4 controllers paired with a cable, you will need to use a wired controller. There are only a few PS4 wired controllers on the market, but Hori makes a couple of gamepad versions.
While these gamepads are not as full featured as a Sony Dual Shock 4 (i.e., no light bar, no rumble, no speaker, no headset jack, etc), they will at least let you control your PS4 when nothing else will. Amazon also offers a few PS4 wired arcade-style stick controllers that may work. Make sure they have a PS button to launch the PS4’s XMB menu. Also, you will need to double-check that they are, in fact, wired controllers. While most third party controllers are wired, you’ll definitely want to read through the product description in the listings carefully to make sure it doesn’t use a wireless dongle. Though, a wireless dongle may work for controlling the PS4 for a short period of time, they may not work for long gaming sessions as they have tendencies to time out forcing the controller to be reconnected often.
Hori Pad FPS Pro Gamepad
I recently picked up a Hori Pad FPS Plus. This is a very nice controller with the exception of two things. First, the shoulder buttons take getting used to because they are pressure sensitive in a different way from the DS4’s trigger shoulder buttons. Because it takes a different amount of pressure to activate them, it feels different from the trigger controllers on the DS4. Once you get used to the pressure needed for these shoulder buttons, everything else is pretty much spot on including the touch pad. And, I like the reversed placement of the D-Pad and the left joystick (like the Xbox controller). This game pad is also well made and quite light in weight because it doesn’t have the lightbar, rumble or battery. I also like that I can continue to play without worry of running out of battery. The second issue, it won’t turn on the PS4 with the press of the PS button when the PS4 is off. For me, this is only a small problem because I have CEC enabled. Simply switching to the PS4’s HDMI port turns the PS4 on. Otherwise, you’ll need to get up and touch the power button or use a DS4 to turn it on and then use PS button on the Hori to get into the menu (the DS4 controller will automatically turn off when the Hori Pad logs in).
Note that there are other things the Hori Pad doesn’t have, like a headphone jack or a speaker. While I do like the speaker on the DS4, for me it doesn’t ruin the game without it. Yes, it is kind of cool when GTA5’s phone comes out of the DS4’s speaker, but it’s mostly a gimmick.
Dualshock 4 and Computers
Note, you can use this same pairing approach to pair this controller to other operating systems. For example, a Mac or Windows. The trouble, while the DS4 does pair, you still need a driver to map the buttons to make the controller useful. For this reason, it’s not that useful on a Mac yet, but you might try Joystick Mapper. I know the Joystick Mapper devs were working on an update to drive the DS4 controller on a Mac. For Windows, there’s InputMapper that does work.
As for pairing and using it on iOS or Android, it might pair but won’t be useful. Yes, some have managed to pair it, but it doesn’t seem to have any kind of drivers or support. I’d like to see Sony create a PS Vita gaming tablet that fully supports the DS4. That would be the best of all worlds. Skip iOS and Android and go right for a full out Sony gaming tablet. But, Sony definitely needs to get more gaming devs on board to bring the blockbuster titles. But, that’s another topic entirely.
While I understand Sony’s reluctance to document a wireless pairing guide like this due to the need for an already working controller, I really don’t like having to locate that special Sony microUSB cable for this process. Not all microUSB cables are equal. If you don’t have the correct Sony PS4 (or compatible) cable, the pairing process above won’t work. Because this cable looks like all other black microUSB cables, you can easily mix them up or lose them. For that $65, I don’t understand why Sony can’t include a 3′ compatible cable in the box with the controller since the PS4 is so finicky about which cable will work.
I also don’t typically leave dangling cables hanging from my console for a variety of reasons including safety. So, locating this special pairing cable is not always quick in my house. I mean, one black cable looks like any other. Sony doesn’t specifically mark the cable well, so digging through a ton of microUSB cables trying to find that special Sony cable isn’t something I want to spend my time doing… especially when I already have a working controller.
When you have at least some kind of a functional controller, wireless pairing is a perfectly acceptable (and more efficient) alternative. Yet, Sony’s site mentions nothing of this process. That’s the reason I document it here.
If this article helped you, please leave a comment below. If you had difficulties pairing your device, please let me know that too.